Whittaker Smart Care® Twin Pro System
Additional Information
Step 1 - Pre-vacuum with a CRI SOA Silver vacuum four passes at 1.8ft/sec.
Step 2 - Apply Crystal Extract® Pre-Spray (diluted 1:10 with water) at a rate of 1gal/500ft2 and let dwell five minutes.
Step 3 - Operate the Smart Care® TWIN machine forward and backward at 1.8ft/sec. Spray Crystal® Quick Restore™ solution (diluted 1:10 with water) on forward pass only.
Step 4 - Vacuum two passes at 0.5ft/sec after carpet is dry.
The Whittaker Smart Care® TWIN system was operated as follows. Pre-vacuum with a CRI SOA Silver vacuum four passes at 1.8ft/sec. Apply Crystal Extract® Pre-Spray (diluted 1:10 with water) and let dwell five minutes. Operate the Smart Care® TWIN machine forward and backward at 1.8ft/sec. Spray Crystal® Quick Restore™ solution (diluted 1:10 with water) on forward pass only. The final step is to vacuum two passes at 0.5ft/sec after carpet is dry.
Step 2 - Apply Crystal Extract® Pre-Spray (diluted 1:10 with water) at a rate of 1gal/500ft2 and let dwell five minutes.
Step 3 - Operate the Smart Care® TWIN machine forward and backward at 1.8ft/sec. Spray Crystal® Quick Restore™ solution (diluted 1:10 with water) on forward pass only.
Step 4 - Vacuum two passes at 0.5ft/sec after carpet is dry.
The Whittaker Smart Care® TWIN system was operated as follows. Pre-vacuum with a CRI SOA Silver vacuum four passes at 1.8ft/sec. Apply Crystal Extract® Pre-Spray (diluted 1:10 with water) and let dwell five minutes. Operate the Smart Care® TWIN machine forward and backward at 1.8ft/sec. Spray Crystal® Quick Restore™ solution (diluted 1:10 with water) on forward pass only. The final step is to vacuum two passes at 0.5ft/sec after carpet is dry.
